Binary 520 Series 1080p HDBaseT Conference Room Extender Scaler
This Binary Single Cat-5 extender proves that one extender really can meet all your needs. With just one cat-5/5e/6 cable, send either HDMI or VGA with Stereo Audio signals over distances up to 330ft (100 m). As a bonus, this extender can be used in either light commercial or heavy residential, as it supports bi-directional IR, RS-232 and IP over a single category cable. You can even use the dip switch setting to set the priority of HDMI or VGA based on the Conference room applications.
HDMI UP/Down Scaler/Converter
Atlona HDMI UP/Down Scaler/Converter
Three Input Scaler HDMI/VGA
Scaler with built-in 3×1 switcher for HDMI and VGA signals. It features two HDMI inputs and a VGA input with 3.5mm audio connector. The scaler is designed to take video signals from switchers, PCs or laptops and upscale them to an HDMI output in a wide-range of HDTV and PC resolutions, up to 1080p/60Hz and WUXGA, 1920×1200. For ease of operation, the AT-HD-SC-500 features auto-switching for active input section when sources are connected or if there is a change in source power status. Input selection can also be controlled from the front panel or by RS-232 and TCP/IP commands. Set-up is performed using Atlona’s webGUI or OSD. Set-up options include the ability to set preferred resolutions plus advanced control of brightness, contrast, saturation, hue and sharpness. The AT-HD-SC-500 is ideal for applications where multiple signals with different resolutions must be optimized for a display’s input
3×1 switcher HDMI and VGA
HDBaseT transmission over Ethernet enabled. Features two HDMI inputs and a VGA input with 3.5mm audio connector. 200-TX combines the benefits of a switcher with built-in auto-switching and the advantages of extended-distance. HDBaseT signal transmission over a single cable. HDMI signals up to 4K/UHD @ 60Hz 4:2:0 with embedded audio,. VGA input signals up to 1920x1200, and control signals can be extended up to 328 feet (100 meters).