Tuesday, November 13, 2018
> Shop > In Wall and In Ceiling Speakers > Multi Room In Wall Speakers
Your cart is empty
Price:
$ to $
1–42 of 42 results
Per Page:
Sort
1–42 of 42 results
Page 1 of 1
Bose SoundTouch

Virtually Invisible 691 wall
In wall speaker. 5 inch woofer, 2 tweeters providing Stereo Everywhere performance

more...
Bose SoundTouch

Virtually Invisible 891 wall
In wall speaker 7 inch woofer, 2 tweeters providing Stereo Everywhere performance

more...
NuVo

8in In-Wall AccentPLUS1
8 inch In-Wall AccentPLUS1 Speaker. Pair

more...
NuVo

6.5in In-Wall AccentPLUS2
6.5 inch In-Wall AccentPLUS2 Speaker. Pair

more...
NuVo

8in In-Wall AccentPLUS2
8 inch In-Wall AccentPLUS2 Speaker. Pair

more...
Triad

Designer Series

Designer Series speakers are the perfect solution when the job specification calls for no visible speakers. It uses a “defuse source” vibrating soundboard technique, much like the principle of a musical instrument, to reproduce clear, clean, highly detailed sound. Designed to be installed in walls or ceilings and skimmed over with up to 5/64” (2mm) of plaster or drywall compound. Once plastered in, they become completely sealed and protected, which makes them suitable for humid or wet areas such as pools or bathrooms. Frequency response is 100Hz – 20kHz (+/ 3dB). Minimum amplifier power required is 20 watts per channel. Sensitivity: 82dB 1W/1M 2-ch driven. Max SPL, 95dB 1W/1M 2-ch driven. 8 ohm. Opti-Drive and Opri-Damping Technology.
Back boxes available: DSB and DSSW. HPF-2 or HPF-8 or other high pass crossover must be used to protect the speaker and validate the warranty.
Enclosure Dimensions:
Length 17-3/4 inches
Width 13-5/8 Inches
Depth 1-5/8 Inches

more...
Triad

Invisible Speaker LCR 40 Watt

Enhanced D300 Designer Series speakers are the perfect solution when the job specification calls for no visible speakers. It uses a “defuse source” vibrating soundboard technique, much like the principle of a musical instrument, to reproduce clear, clean, highly detailed sound. Designed to be installed in walls or ceilings and skimmed over with up to 5/64” (2mm) of plaster or drywall compound. Once plastered in, they become completely sealed and protected, which makes them suitable for humid or wet areas such as pools or bathrooms. Frequency response is 100Hz – 20kHz (+/ 3dB). Minimum amplifier power required is 2X40 watts per channel. Sensitivity: 84dB 1W/1M 2-ch driven. Max SPL, 99dB 1W/1M 2-ch driven.
Back boxes available: DSB and DSSW. HPF-2 or HPF-8 or other high pass crossover must be used to protect the speaker and validate the warranty.
Enclosure Dimensions:
Length 17-3/4 inches
Width 13-5/8 Inches
Depth 1-5/8 Inches

more...
Triad

Invisible Speaker 80 watts

Designer Series speakers are the perfect solution when the job specification calls for no visible speakers. It uses a “defuse source” vibrating soundboard technique, much like the principle of a musical instrument, to reproduce clear, clean, highly detailed sound. Designed to be installed in walls or ceilings and skimmed over with up to 5/64” (2mm) of plaster or drywall compound. Once plastered in, they become completely sealed and protected, which makes them suitable for humid or wet areas such as pools or bathrooms. Frequency response is 100Hz – 20kHz (+/ 3dB). Minimum amplifier power required is 2X40 watts per channel. Sensitivity: 87dB 1W/1M 2-ch driven. Max SPL, 105dB 1W/1M 2-ch driven. Opti-Drive and Opti-Damping technology.
Back boxes available: DSB and DSSW. HPF-2 or HPF-8 or other high pass crossover must be used to protect the speaker and validate the warranty.
Enclosure Dimensions:
Length 17-3/4 inches
Width 13-5/8 Inches
Depth 1-5/8 Inches

more...
Definitive Technology

6.5 Inch In wall
6.5 inch composite mineral filled polypropylene driver cones with rubber surround.. Acoustically optimized annealed aluminum 1 inch pivoting dome tweeter. High definition crossover network with mylar capacitors for the purest high frequencies. Gold plated heavy duty push terminals accept up to 12AWG cables.The Disappearing Grille Really Disappears 0.6mm micro perf grilles are wafer thin with slim bezels. Instantly locks in place with powerful neodymium magnets. Paintable for the ultimate in invisibility. . Cut Out 7.25 x 12.75, Grill 13.81 x 8.25. Depth 3.31 inches.

more...
Definitive Technology

8 Inch In wall
8 inch composite mineral filled polypropylene driver cones with rubber surround.. Acoustically optimized annealed aluminum 1 inch pivoting dome tweeter. High definition crossover network with mylar capacitors for the purest high frequencies. Gold plated heavy duty push terminals accept up to 12AWG cables.The Disappearing Grille Really Disappears 0.6mm micro perf grilles are wafer thin with slim bezels. Instantly locks in place with powerful neodymium magnets. Paintable for the ultimate in invisibility. . Cut Out 8.75 x 12.75, Grill 13.81 x 9.87. Depth 3.75 inches.

more...
Episode

Episode 150 Series In-Wall Speakers (Pair) - 6"
These thin bezel, in-wall speakers combine reliable sound clarity and affordability for any home audio system. They also feature a 1/2" mylar tweeter for better sound quality.

more...
Episode

Episode 350 Series In-Wall Speakers (Pair) - 6"
Get ready to find your go-to speakers. Episode 350 Series Thin Bezel Speakers offer a simple solution for a variety of multi-room audio applications. They also feature a pivoting teteron tweeter allowing for increased sound clarity.

more...
Episode

Episode 350 Series In-Wall Speakers (Pair) - 8"
Get ready to find your go-to speakers. Episode 350 Series Thin Bezel Speakers offer a simple solution for a variety of multi-room audio applications. They also feature a pivoting teteron tweeter allowing for increased sound clarity.

more...
Episode

Episode 550 Series In-Wall Speakers (Pair) - 6"
Episode 550 Series Speakers offer excellent sound which can be customized to suit application and preference. Durable teteron tweeter allows for better clarity at higher volumes, while the adjustment switch lets you customize tweeter output by 3dB for perfect sound.

more...
Episode

Episode 550 Series In-Wall Speakers (Pair) - 8"
Episode 550 Series Speakers offer excellent sound which can be customized to suit application and preference. Durable teteron tweeter allows for better clarity at higher volumes, while the adjustment switch lets you customize tweeter output by 3dB for perfect sound.

more...
Episode

Episode 550 Series In-Wall LCR Speaker (Each) - 6"
The Episode 550 Series In-Wall LCR Speakers offer excellent sound which can be customized to suit audio application and preference. Mount them vertically or horizontally, depending on left and right or center channel applications, plus the adjustment switch lets you customize tweeter output by 3dB for perfect sound.

more...
Episode

Episode 550 Series In-Wall Surround Speakers (Pair) - 6"
These thin bezel, in-wall speakers combine reliable sound clarity and affordability for any home audio system. They also feature a 1/2" mylar tweeter for better sound quality.

more...
Episode

Episode 700 Series In-Wall Speakers with 6-1/2" Woofer (Pair)
Designed to meet the demands of critical listeners, these Episode 700 Series In-Wall Speakers are equally capable as music or home theater speakers. Even at low volume levels, you'll appreciate the clarity and detail that these speakers produce… and when you turn them up, you’ll enjoy a wide, natural soundstage and exceptionally dynamic sound.

more...
Episode

Episode 350 Series All Weather In-Ceiling Speakers (Pair) - 6" Woofer
These speakers offer a simple solution for a variety of outdoor audio applications. They also feature a 3/4" pivoting teteron tweeter allowing for clarity at higher volumes.

more...
Episode

Episode 350 Series All Weather In-Ceiling Dual Voice Coil Speaker (Each) - 6" Woofer
These speakers offer a simple solution for a variety of outdoor audio applications. They also feature a 3/4" pivoting teteron tweeter allowing for clarity at higher volumes.

more...
Episode

Episode Signature 1300 Series In-Wall Speaker (Each) - 6"
Forward-set polypropylene woofer for wide dispersion and punchy bass.

more...
Episode

Episode Signature 1300 Series In-Wall Speaker (Each) - 8"
Forward-set polypropylene woofer for wide dispersion and punchy bass.

more...
Episode

Episode Signature 1300 Series In-Wall Dual Voice Coil Speaker (Each) - 6"
Impeccable clarity meets astounding design, for a speaker that’s bound to impress every time. It’s a perfect fit for multi-room audio and its smart installation features make it a winner for custom installs.

more...
Episode

Episode Signature 1500 Series In-Wall Speaker (Each) - 6"
Forward-set woofer for wide dispersion and tight bass.

more...
Episode

Episode Signature 1500 Series In-Wall Speaker (Each) - 8"
Forward-set woofer for wide dispersion and tight bass.

more...
Episode

Episode Signature 1500 Series In-Wall Dual Voice Coil Speaker (Each) - 6"
Forward-set woofer for wide dispersion and tight bass.

more...
Episode

Episode Signature 1500 Series In-Wall LCR Speaker (Each) - 6"
Forward-set woofer for wide dispersion and tight bass.

more...
Episode

Episode Signature 1500 Series In-Wall Surround Speaker (Each) - 6"
Forward-set woofer for wide dispersion and tight bass.

more...
Episode

Episode Signature 1700 Series In-Wall Speaker (Each) - 6"
Direct sound where you want to create more immersive experiences.

more...
Episode

Episode Signature 1700 Series In-Wall Speaker (Each) - 8"
Direct sound where you want to create more immersive experiences.

more...
Episode

Episode Signature 1700 Series In-Wall LCR Speaker (Each) - 6"
Forward-set woofers for wide dispersion and tight bass.

more...
Episode

Episode Signature 1700 Series In-Wall Surround Speaker (Each) - 6"
Forward-set woofer for wide dispersion and tight bass.

more...
Episode

Episode Signature 1300 Series All Weather In-Ceiling Speaker (Each) - 6"
Impeccable clarity meets astounding design, for a speaker that’s bound to impress every time. A weather-resistant makeup ensures a perfect fit for indoor and outdoor audio, while its smart installation features make it a winner for custom installs.

more...
Episode

Episode Signature 1300 Series All Weather In-Ceiling Dual Voice Coil Speaker (Each) - 6"
Impeccable clarity meets astounding design, for a speaker that’s bound to impress every time. A weather-resistant makeup ensures a perfect fit for indoor and outdoor audio, while its smart installation features make it a winner for custom installs.

more...
Triad

DSi-3 Developer series

more...
Triad

InWall Silver/6 Monitor
The InWall Silver/6 Monitor is well suited to critical two-channel listening or, with it's 92 dB sensitivity, it is just as appropriate for demanding home theater applications. It can be used as a full-range monitor, a high-end point-source surround. Where there is a 6 inch wall stud depth, the InWall Silver/6 Monitor installs flush using Triad's elegant Acoustimesh grill. Triad can custom match the grill paint to any color, giving you superb yet invisible sound reproduction.
Drive Units: (1) 1 in Ultra high efficiency fabric dome tweeter, (2) 5-1/4 in midranges. Power Handling : 200 watts. Impedance 4 ohms. Sensitivity: 92.5 dB/1W/1m. Frequency Response:
70 Hz - 20 kHz (+/-3dB). New Construction Bracket: (NCB) size K. Dimensions: W 8-3/16 in, H 19 in, D 5-15/16 in Wall Hole Cut Out: Width 8-1/2 in X Height 19-1/4 in
InWall Frame/Grill: Width 8-7/8 in X Height 19-11/16 in

more...
NuVo

6.5 Inch In Wall Speaker Pair
Silk dome pivoting tweeters and poly woofers. Completely rimless, magnetic grill.

more...
NuVo

Series 6 6.5 In-Wall Pair

more...
Definitive Technology

In-Wall Speaker (Single)
The Reference Line Source II (RLS II) is an enclosed full range loudspeaker engineered for flush mount in-wall installation. It features a non-resonant sealed medite (a dense wood product) enclosure to deliver the tight, detailed bass and uncolored midrange of audiophile free-standing speakers in every installation.Two 6-1/2 inch cast basket drivers and 6-1/2 inch pressure-coupled Low Bass radiators for impressive deep bass with high impact punch. Integrated wood enclosure ensures consistent high performance every time. One 1 inch Pure aluminum dome tweeter.
Outer Flange Dimensions :8-1/8W x 29-3/4H
Cut Out Dimensions :7W x 28-1/2 H
Depth from Flange :3-13/16 inches
Frequency Response :22 Hz – 30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :92 dB
Recommended Associated Amplifier Power :10 – 350 watts
A/V Receiver Crossover Setting :40 Hz
Inputs :One pair of gold plated spring loaded posts
Enclosure :Sealed Medite

more...
Definitive Technology

In-Wall Speaker (Single)
The Reference Line Source III (RLS III) is an enclosed full range loudspeaker engineered for flush mount in-wall installation. It features a non-resonant sealed medite (a dense wood product) enclosure to deliver the tight, detailed bass and uncolored midrange of audiophile free-standing speakers in every installation. Two 5-1/4 inch cast basket drivers and 5-1/4 inch pressure-coupled Low Bass radiators for impressive deep bass with high impact punch. Integrated wood enclosure ensures consistent high performance every time. One 1 inch Pure aluminum dome tweeter. Installs in either new or existing construction applications.
Outer Flange Dimensions :7 W x 25H
Cut Out Dimensions :5-7/8W x 23-3/4 H
Depth from Flange :3-13/16in
Frequency Response :24 Hz – 30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :92 dB
Recommended Associated Amplifier Power :10 – 325 watts
A/V Receiver Crossover Setting :60 Hz
Inputs :One pair of gold plated spring loaded posts
Enclosure :Sealed Medite

more...
Sonance

RECTANGLE 6 INCH 2 WAY

1 inch powder-coated aluminum dome, Ferrofluid-cooled, pivoting, in acoustic back chamber. 6 1/2 inch Kevlar/Nomex laminated cone with a rubber surround. 43Hz - 20kHz ±3dB. 8 ohms nominal. 90dB SPL. 10 lbs. Dimensions (W x H) 8 3/8 x 12 1/4 inches. Cut-Out Dimensions 6 15/16 x 10 3/4 inches. Speaker Depth 3 1/2 inches.

more...
1–42 of 42 results
Page 1 of 1